Biomedical Waste Treatment Plant

Waste are something we try to avoid, reduce or dump. As natural resources on our planet is now shrinking, we are also trying to dispose of waste properly. But medical waste has the added risk if not poorly managed. Apparently, a biomedical waste treatment plant will be very necessary for hospitals or those who have large amount and various municipal solid waste to deal with. Showing up of such treatment plant is also an insurance for a safe and healthy living environment for human.

Medical Waste Pyrolysis Plant
Biomedical Waste Treatment Plant for Sale

Traditional Biomedical Waste Treatment and Disposal Methods

Perhaps you will wonder, where does medical waste go. According to the statistics of recent years, 90% of the biomedical waste end in incineration, 7% of them receive sterilization in autoclaves and a very small percentage of the waste are disposed of by other methods like microwave treatment and irradiation.

Different from all the aforementioned methods, GreenBeston supplies a high efficiency and green plant to dispose of medical waste. It adopts the technology of pyrolysis. It is very different from the traditional methods.

Difference Between Incineration and Pyrolysis

Pyrolysis refers to the dissociation happens under the oxygen-absence environment with a high temperature. The raw materials can decompose into combustible gas, charcoal and pyrolysis oil.
Incineration refers to a process of thorough oxidation and heat releasing under the environment with plenty of oxygen. Even though the efficiency of incineration is much higher than pyrolysis, there will be TCDD, oxynitride and ashes generated during the process.

If burning a large amount of biomedical garbage, there will be much sever air pollution we should face with. As a result, comparing with incineration, using pyrolysis as the main technology of biomedical waste treatment plant will be a much safer way of recycling. At the same time, pyrolysis oil and charcoal produced during pyrolysis have large market value. It can bring additional profits for the investors.

Biomedical Waste Treatment Plant
High Quality and Safe Medical Waste Disposal Plant

Biomedical Waste Treatment Process

Owing to the potential danger of the medical waste, we will firstly go through the process of sterilization and smashing. In addition, most of the medical waste contains water, we need to dry them if the humidity is higher than 15%.

1.After the pretreatment, auto screw feeder will convey the medical wastes to the reactor and then the reactor will be heated. As the temperature inside of the reactor reaches to certain level, oil gas will generate and then go to the manifold. Heavy particles in the oil gas will be liquefied and reserved in heavy oil tank. Light oil gas flows up to the condenser and then be liquefied and reserved.

2.There will be combustible gas generated as well. It will be cleansed and desulfurized in the hydroseal. And then it can be used as fuel to heat the reactor.

3.The flue gas will be cooled down and de-dusted firstly. And then it goes through four filter systems in the spray tower, which are washing, water spray, ceramic ring adsorption and activated carbon adsorption. And finally it will meet EU environmental emission standard and discharged safely.

The end products of this whole process is pyrolysis oil and coarse carbon black. Both of them are fuels. The clients can also choose to reprocess the pyrolysis oil by waste oil distillation plant to obtain diesel with better quality and a carbon black processing machine to get finer carbon black. Doubtlessly, they will help our clients to earn more money from recycling.

Features of Our Biomedical Waste Treatment Plant for Sale

1.Energy-saving and Environmental Friendly
2.Original Design
3.Safety Configuration

Biomedical Waste Pyrolysis Plant for Sale
Medical Waste Disposal Plant

Specification and Parameters of GreenBeston High Quality Biomedical Waste Disposal Equipment

Types of Plastic Coming from Oil yield
PE films, bottles, electrical insulating materials, handbags, bottles/calcium bottles, daily necessities, etc. 95%
Polypropylene (PP) films, plastic rope, tableware, pots, barrels, furniture, bags, caps, car bumpers, etc. 90%
Polystyrene(PS) electrical appliances, stationery, cups, food containers, appliance housings, electrical fittings, foam products, toys, etc. 90%
ABS plastic N/A 40%
Pure white plastic sheeting N/A 70%
Waste Plastic Pyrolysis Plant Design
Continuous Waste Plastic Pyrolysis Machine of Beston

Our waste plastic to oil machine is well-designed and has good quality. It mainly consists of the auto screw conveyor, casing, reactor, manifold, condenser, heavy oil tank, oil storage tank and de-dusting system. Different from most of the waste pyrolysis plant manufactures, we add refractory material between the casing and reactor. The material can protect the reactor against over-high temperature to prolong its lifespan, and at the same time, it can reduce energy consumption caused by heat loss.

Specification and Parameters

Item Details
Model BLJ-6 BLJ-10 BLJ-16 BLL-20
Daily Capacity 6T 8T-10T 15-20T 20-24T
Working Method Batch Semi-Continuous Fully Continuous
Raw Materials Waste Plastic, Tyre, Rubber, Oil Sludge
Reactor Size D2.2*L6.0m D2.6*L6.6m D2.8*L7.1m D1.4*L11m
Pattern Horizontal & Rotary
Heating Materials Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.
Total Power 24kw/h 30kw/h 54kw/h 71.4kw/h
Floor Area (L*W*H) 30*10*8m 30*10*8m 40*10*8m 45*25*10m
Operating Pressure Normal Pressure Constant Pressure
Cooling Method Water Cooling
Life span 5-8 Years

Biomedical Waste Treatment Plant Manufacturers

A large number of excellent suppliers come onto the stage recent years. If you want to invest in this business, you will fully consider of the recycling technologies of those manufacturers and advantages of their plants. A company manufacturing high quality low price pyrolysis plant for medical waste shall be the first choice. Secondly, they shall have a strong ability of subsequent maintenance, in case there are some problems happens while using the machines. Thirdly, they shall have strong power in exporting, because most of the professional manufacturers of such plants come from China, India and the US, etc.

Biomedical Waste Treatment Facility
High Quality Medical Waste Treatment Plant Manufacturer

Biomedical Waste Treatment Plant Cost

Biomedical waste is a dangerous waste for human. The processing of them will be a little bit complicated than other solid wastes like scrap tyres and plastic. So it asks for a enough budget to invest. Nevertheless, we will try the best to control the expense of our clients, thus the cost of GreenBeston medical waste disposal equipment is quite affordable. At the same time, through the process of pyrolysis, those waste can produce carbon black and pyrolysis oil. You can earn money from those end products and it is a good way to reduce the cost on it.

To sum up, Beston(Henan) Machinery Co., Ltd. will be a good choice for you. We have top medical waste treatment technologies, a wonderful team of designing and manufacturing and strong ability in foreign trade. The most important is that our biomedical waste treatment plants have high performance cost ratio. Therefore, we are a suitable supplier for the buyers who want good plants and reasonable price. If you want to know more information of GreenBeston, you can go to the homepage to learn more.

Please feel free to give your inquiry in the form below. We will reply in 24 hours.
Product Model:

Your Name(required):

Your Email(required):

Your Tel(required):

Your Country:

Your Company:

Your Message(required):