Plastic to Oil Machine Price

Whether the plastic to oil machine price is reasonable or not depends on the performance cost ratio of the machine. Does the machine have a high working efficiency? Will you get enough profits from the machine? Will you need to spend additional money on it after you buy it? These are the questions you must consider if you want to buy it at a reasonable price.

Waste Plastic to Oil Plant Cost
Get a Reasonable Plastic to Oil Machine Price from Beston

Firstly, does the machine have a high working efficiency?

High working efficiency means a strong daily capacity and high output. As a professional manufacturer, Beston Group has the ability to produce high-quality plastic to oil machine with high efficiency which enables the customer get the returns from the price of the plastic to oil machine as soon as possible. Here is the information about our four main types of plants,

Item Details
Model BLJ-6 BLJ-10 BLL-16 BLL-30
Daily Capacity 6T 10T 15-20T 30T
Working Method Batch Semi-Continuous Fully Continuous
Raw Materials Waste Plastic, Tyre, Rubber, Oil Sludge, Medical Waste
Reactor Size D2.2*L6.0m D2.6*L6.6m D2.8*L7.1m L12.5*W2.2*H2.5m
Pattern Horizontal & Rotary
Heating Materials Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.
Total Power 24kw/h 30kw/h 54kw/h 53.6kw/h
Floor Area (L*W*H) 20*10*10m 25*15*10m 25*15*10m 33*15*10m
Operating Pressure Normal Pressure Constant Pressure
Cooling Method Water Cooling
Service Life 5-8 Years

The longer time you use this machine, the higher return from the plastic to oil machine cost you can get. All the machines in Beston have 5-8 years’ lifespan if they are used properly, you’ll get a competitively high return from them.

Plastic to Oil Machine Price
Beston Cost-Effective Plastic to Oil Plant in Indonesia

Secondly, will you get enough profits from the machine?

As we all know, the end products of a plastic to oil plant is combustible gas, pyrolysis oil and carbon black.

1. Usually, the combustible gas is reused as the fuel to heat the pyrolysis reactor during the working process of the machine. It is a good way to save the fuel consumption for the customer.

2. Different kinds of plastic waste have different oil yields, which is as follows,

  • Polyvinyl Chloride and Polyethylene: 95%
  • Polypropylene: 90%
  • Polystyrene: 90%
  • ABS: 40%
  • Pure White Plastic Sheet: 70%

The oil can be sold to the market as the raw material to produce diesel fuel. The customers can also choose to get an oil distillation machine to get diesel oil from the pyrolysis oil by themselves.

3. The carbon black is also a useful material that can be applied in many different industries.

As a result, before you pay the money for the plant, you need to make sure the quality of the pyrolysis oil and carbon black, so as to make sure whether you can sell them out at a considerable price and then get more profits from your investment.

Plastic to Oil Machine Cost
Diesel Oil from Plastic Waste

Plastic to Oil Plant Price
Carbon Black

Thirdly, will you spend additional money on it after buying it?

It is an important thing you need to know before paying the plastic to oil machine price. A good pyrolysis plant manufacturer like Beston can grantee a professional after-sale service to reduce the customer’s additional cost as much as possible.

For example, after the customer has signed the contract and ordered the plant, we will ship the plant as soon as possible to save time cost. And then, we will send our engineering team with the plant to the customer’s place. The engineers will help with the preliminary preparation, assembling and commissioning. Moreover, they are also responsible for training the local workers to operate the plant properly. What’s important, our plant is eco-friendly and it means that you will spend less money on the flue gas discharge.

Besides, all the plant Beston has sold has a one-year warranty and a 24-hour hotline for the customer in case they have any emergent questions about the plant. And the above-said services are all for free. That will save a lot of cost for our customers and make the plastic to oil equipment prices of Beston more reasonable.

Waste Plastic to Diesel Oil Plant
3D Layout for the Latest Design of the Continuous Type Plastic to Oil Machine

Knowing the Quality Except for the Plastic to Oil Machine Price

After considering the three questions about the plastic to oil plant cost, you may also need to know the real greatness of the machine you want to buy to make sure your investment worthy. Beston’s plastic pyrolysis plant ranks top on the list of the like product because of the following reasons,

Original Design

  • Our plastic to oil plant uses a new heating system. It both has the advantages of open fire heating and wind-type heating.
  • We add refractory material in the casing of the pyrolysis reactor. This design can prolong the lifespan of the reactor and avoid heat loss.
  • We use auto welding techniques while producing the plants.
  • The new PLC computer control system is very handy to use and it has three modes of operation. The clients are able to select the one they prefer according to their actual needs.

Plastic to Oil Machine Price
3-in-1 Oil Discharging System to Improve Working Efficiency

Plastic to Oil Plant Cost
Singapore Customers Interested in the Quality and Price of Beston Plants

Energy-saving Structure

  • The flammable gas generated from the process of pyrolysis will be collected and used as fuel to heat the reactor.
  • The new heating system improves the heating efficiency and saves the cost of fuels for the clients.
  • New casing design can reduce heat loss, so as to save energy.
  • The energy -saving structure can largely reduce the plastic to oil conversion machine cost.

Safety Guarantee

  • The 100% avoid-burn technology and 100% explosion-proof technology can make sure the safety of the operator while they’re operating the plant.
  • The professional thermometer and pressure gage to inspect the temperature and air pressure at any time.
  • We use the outlet valve clog-proof technique in our plastic to oil equipment operation.
Plastic to Oil Conversion Machine Cost
High-Quality Plastic to Oil Machine with Reasonable Cost

The high quality, good performance, and low costs finally make a very reasonable and affordable plastic to oil machine price. That is what GreenBeston is always trying to do. We produce high-end plants and hope they can help people and bring profits for them as much as they can. If you are interested in more information about plastic to oil conversion machine cost, feel free to leave us a message now.

Please feel free to give your inquiry in the form below. We will reply in 24 hours.
Product Model:

Your Name(required):

Your Email(required):

Your Tel:

Your Country:

Your Company:

Your Message(required):