If you want to recycle tyres, especially oil car tires, you should firstly cut them in small pieces, so as to make the following processing easier. I guess you will definitely need a high working efficiency and low cost tyre shredder, an important pre-treatment plant during the process of waste tyres recycling. It can shred big tyres into small pieces. It is widely used for waste tyre pyrolysis plant and other tyre recycling equipment.
Our tyre shredder can shred large entire waste tyres or big tyre bulks, mostly the diameter no bigger than 1200 mm, into small pieces with the size of 50 mm*50 mm. We have introduced the advanced technology in the world to our latest tyre shredding machine and it is a very competitive product of our company.
Features of Beston High Quality Low Cost Tyre Shredder for Sale
1. Compact structure.
2. High working efficiency and low energy consumption. The maximum capacity is 4 tons per hour.
3. We use a side-by-side combination design for the shredding room and it is very convenient for maintenance.
4. The shredding blade adopts hard alloy bead welding technology to make sure a high hardness, strong wear-proofing ability and durability.
5. The round mesh screen uses steel wire grid structure to ensure a large area for the falling materials, so as to screen qualified materials out.
Operation Flow of the Tyre Shredding Machine
1. Before shredding, all of the tyres will be sent to the wire drawing machine and the machine will draw out all the steel wires inside of the tyres.
2. Motor driver of the tire shredder drives hydraulic motor and then slows down through planetary gear. And then uses a strong cutting torque to cut, squeeze and roll the waste tires or tyre pieces constantly under a normal temperature.
3. After that, the tyres will be shredded in to pieces and start to be screened. Qualified pieces will be transited out and the bigger pieces will be sent back to the cutting room to receive another round of cutting with other materials.
4. The above process will be repeated until all the qualified tyre pieces are transited out.
5. Finally you will get tyre pieces with the size of 50 × 50 mm. Since our tyre shredding machine is a pretreatment plant for pyrolysis plant and tyre rubber powder producing line, we usually use belt conveyor to transit the qualified tyre piece to the next step of processing.
Beston provide two types of tire shredder machine for sale with different capacities. you can see the detailed parameters as follows,
|Feeding Material Size||≤φ900 mm||≤φ1200 mm|
|Output Material Size||50*50mm||50*50mm|
|Weight||6.8 T||18 T|
The clients can buy tyre shredder according to the actual needs and budgets. Aside from high quality machines, GreenBeston also provide best after-sale services to our clients. We have a professional technical maintenance team and they are ready to solve every problem you have about our products.